Home > Products > Industry > Crono-Display

CRONO-DISPLAY

LED STOPWATCHES FOR INDUSTRY
Giant chromometer led displays, stopwatch display, minutes, seconds, cents, stopwatch display, red leds, led stopwatch minutes, seconds, cents, chromometer displays industrial environment, chromometer displays industrial environment, stopwatch display, minutes, seconds, cents, , , stopwatch display, minutes, seconds, stopwatch led display seconds, cents, Giant led stopwatch displays
English

Crono-Display is the series dedicated to timekeeping in industrial field. Chrono-Display is indispensable when there is the need for timing the processing steps and make the result visible to the operators who are in a large environment, such as an industrial warehouse or even outdoors in direct sunlight.

Crono-Display can be manually controlled via a control panel connected by wire and by remote control. It is also available in "SLAVE" version controlled via PC software (see below).


The following standard functions are available:

PRESET FUNCTIONS

  • Count settings in UP or DOWN;
  • Time format settings: hours, minutes, seconds, cents;
  • Starting time (especially useful for DOWN counting).

OPERATIVE FUNCTIONS

  • Start
  • Stop
  • Reset

LED stopwatch minutes, seconds
LED Stopwatch, digit height cm 23

 

OPTIONS AND ADDITIONAL FEATURES
To signal the arrival of the count to zero is possible to implement an internal buzzer or a relay contact for activation of an external visual or audible signal. You can also implement customized functions (to evaluate and develop on request) as for example: stop to a programmable number; activation of an audible or visual signal to event or the achievement of a programmable value; Automatic restart at the end of counting or event, etc.


SLAVE VERSION (manageable from PC and software)

Crono-Display is also available in "SLAVE" version, which is controlled via PC. This version is also very useful for lap times in sports and in council chambers and conference rooms for marking times assigned to the speakers. With this version the "Crono up-down" software is provided. The Crono-Display is, in this case, a "passive" terminal. The software performs timing and sends the data to Crono-Display each second (every tenth of a second for the version that displays cents of a second). Therefore the timing is displayed on Crono-Display only if it is connected to the PC. The connection can be via RS232 serial port (cable m 15), RS485 (cable m 400) or Ethernet (direct or throung a LAN network).

MAIN SOFTWARE FUNCTIONS

  • setting starting time;
  • start timing in down;
  • start timing in up;
  • return to starting time;
  • to add time to settled time (useful for use in council chambers and conference).

 

ADDITIONAL FEATURES

  • Clock mode instead of timing. This feature allows you to take advantage of the display as a clock when there are no timing requirements;
  • Activation of a light or sound signal outside or deactivation of a microphone. To take advantage of this opportunity the Crono-Display must be ordered with relay contact output. Through this contact, you can control such as the lighting of a lamp that signals the end of time, or the speaker's microphone off. Alternatively you can opt for the activation of a buzzer (BIP) internal to the display.

 

The software allows you to set the contact switch mode: in automatic mode (activated when the count reaches zero) or manual mode (can be activated by clicking a software button). You can also set the duration of the activation / deactivation (5 sec, 10 sec, 30 sec ... etc.). The system also comes with a serial cable of 5 m (extension available on request) to connect the clock to the PC.


INDOOR AND OUTDOOR

Crono-Display is made in "indoor" version for installations in indoor environments and "outdoor" version for installation in outdoor environments.

INDOOR VERSION
The indoor version has an IP50 rank of protection. Brightness and type of LEDs varies depending on the model: the Crono-Display CR5 (those with digits height 56 mm) are made with LED type "seven-segment" bar led on resin blocks. On all other models LEDs with 1600 MCD are mounted with maximum brightness angle of 110 degrees. Both the LED types have a suitable brightness for indoor use and are easy to read closely and from any angle.

OUTDOOR VERSION
The outdoor version is supplied with the case-box protected from the weather (IP55 option) and the LEDs superbright 3,200 MCD giving excellent daytime visibility even in direct sunlight. Models with digits height 56 mm (CR5) are available with IP55 protection, but not with superbright LEDs for daytime visibility.

HIGHER PROTECTIONS
It is possible to provide a greater rank of protection (to be assessed and quoted on request) for cases in which the display is intended for particularly harsh environments, for example in environments where there are strong jets of water (IP65), or in an industrial building where there are very aggressive acid vapors (option to be evaluated).


LED chromometer profinet
red led chromometers, digit height cm 15 and cm 23


Standard models

time format
MINUTES : SECONDS
(alternatively “seconds : cents” or “hours : minutes”)

display cronometro CR47-4

4
DIGITS

model

digit height
in cm

external measures in cm
length, height, thickness

CR5-4

5,6

25 x 11,5 x 4

CR10-4

10

47 x 19 x 8

CR15-4

15

62 x 22 x 8

CR23-4

23

85 x 32 x 8

CR32-4

32

111 x 40 x 8

CR47-4

47

159 x 55 x 8

CR100-4

100

300 x 110 x 8

 

time format
HOURS : MINUTES : SECONDS
(alternatively “minutes : seconds : cents”)

display cronometro CR15-6

6
DIGITS

model

digit height in cm

external measures in cm
length, height, thickness

CR5-6

5,6

35 x 11,5 x 4

CR10-6

10

65 x 19 x 8

CR15-6

15

88 x 22 x 8

CR23-6

23

122 x 32 x 8

CR32-6

32

161 x 40 x 8

CR47-6

47

233 x 55 x 8

CR100-6

100

480 x 110 x 8

 

time format
HOURS : MINUTES : SECONDS : CENTS

display cronometro CR15-8

8
DIGITS

model

digit height in cm

external measures in cm
length, height, thickness

CR5-8

5,6

44 x 11,5 x 4

CR10-8

10

83 x 19 x 8

CR15-8

15

113 x 22 x 8

CR23-8

23

159 x 32 x 8

CR32-8

32

211 x 40 x 8

CR47-8

47

307 x 55 x 8

CR100-8

100

640 x 110 x 8


POWER SUPPLY
All standard items have 220Vac 50-60 Hz power supply. On request it is possible to provide different power supplies: 110Vac, 12V, 24V (AC / DC). The CR5 model have external transformer 12V / 220V but it can also be supplied with built-in transformer.


OTHER FEATURES
Case box: aluminum black colour; Front screen: in methacrylate/polycarbonate; Operating temperature: indoor version 0°/+50°C; outdoor version -10°/+55°C; To facilitate the transportation and installation, the larger models (CR100) can be supplied in modular units version.


OPTIONS

  • Pushbutton for remote management;
  • Remote control and radio receiver for wireless management;
  • Management via 2 dry contacts N / O;
  • “CRONO UP-DOWN” software for timing management via PC;
  • RS232 interface for management via PC;
  • RS485 interface for management via PC;
  • Ethernet interface for management via PC (plug RJ45 connector);
  • Output to zero (00:00), via relay contact for connection to external flashing light or acoustic signal;
  • Internal acoustic signal (BIP), activated at zero (00:00).

Do you want to communicate with us or receive documentation and prices?

contact us